Part Names And Functions Of Ui Pad (Option) - Hitachi CHROMASTER 5160 Instruction Manual

2.2 Part Names and Functions of UI Pad (Option)

2.2 Part Names and Functions of UI Pad (Option)
(1)
(8)
(9)
(10)
(11)
No.
When this module unit is not controlled by Chromato Data
Station (CDS) or GUI controller (option), it is controllable with the
UI pad.
For details of operation keys, refer to Chapter 3.
(2) (3)
(12)
This detector can be operated by key operation on the UI pad or
operations from the chromato-data station. The functions of
respective keys are listed in the table below.
For details of operation keys, refer to Chapter 3.
Indication
1 A/Z (Auto Zero)
Calibrates to zero the ABS indication and
output at the measuring wavelength.
2 WL (Wavelength)
Sets the measuring wavelength.
3 SET UP (Utility, setup)
(1) Sets offset value, time constant, etc.
(2) When this key is pressed
UTLTY
(4)
Fig. 2-2 UI Pad
Function
simultaneously with the power switch,
the channel of communication via e-
Line and LCD contrast become
settable (in SET UP mode).
2 - 2
(5)
(6) (7)
(16) (15)
Refer to:
3.1.3
3.1.4
3.2
3.5
(13)
(14)