Hitachi CHROMASTER 5160 Instruction Manual page 377

5.2 Lamp Replacement
(d) Pull out the W lamp and replace it with a new one
(avoid loosening the screws).
W lamp
W lamp cover
(e) Attach the W lamp cover at the original position.
(f) Reconnect the connector hook of the W lamp lead wire.
(g) Attach the lamp cover at the original position (by
tightening 2 fastening screws).
(4) Operation Check
Plug the power cord into the instrument and turn on the
power switch. Make sure the lamp comes on.
NOTE: The W lamp does not come on if it has not been
mounted properly.
5 - 10