Fujitsu M10 Installation Manual page 112

Figure 3-27 Removing the slide rail
FRONT
5.
Remove the inner rail from the slide rail.
Pull out the inner rail by pulling the lock lever on the inner rail forward.
Figure 3-28 Removing the inner rail
6.
Attach the inner rail removed in step 5 to the side of the chassis.
The left and right inner rails are the same.
a. Align the insertion holes of the inner rail with the pins on the side of the
b. Press and slide the inner rail toward the rear of the chassis.
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
98
A
chassis.
A
REAR
FRONT FRONT