Fujitsu M10 Installation Manual page 229

XSCF> showpcl -p 0
PPAR-ID LSB PSB Status
2.
Execute the setpcl command to create a physical partition configuration list
(PCL).
The following example maps system board 00-0 to logical system board 0 of
physical partition 0.
XSCF> setpcl -p 0 -a 0=00-0
The following example maps system boards 01-0, 02-0, and 03-0 to logical system
boards 0, 1, and 2, respectively, of physical partition 1.
XSCF> setpcl -p 1 -a 0=01-0 1=02-0 2=03-0
3.
Execute the setpcl command to set the configuration policy for all physical
partitions as a whole.
XSCF> setpcl -p ppar_id -s policy=value
In value, specify fru (part), psb (system board), or system (all physical partitions
as a whole) as the degradation unit. The default setting is fru.
The following example sets the configuration policy to "All physical partitions"
for physical partitions 0 and 1.
XSCF> setpcl -p 0 -s policy=system
XSCF> setpcl -p 1 -s policy=system
4.
Execute the showpcl command, and confirm the set physical partition
configuration list (PCL).
XSCF> showpcl -a
PPAR-ID LSB PSB Status
00 Powered Off
00 00-0
----------------------------
01 Powered Off
00 01-0
01 02-0
02 03-0
Chapter 7 Making the Initial System Settings 215