Fujitsu M10 Installation Manual page 263

XSCF> showboards -p 0
PSB PPAR-ID(LSB) Assignment Pwr Conn Conf Test Fault
---- ------------ ----------- ---- ---- ---- ------- --------
00-0 00(00) Assigned y y y Passed Normal
01-0 SP Available n n n Unknown Normal
b. Execute the addboard -c configure command to incorporate the system
XSCF> addboard -c configure -p 0 01-0
PSB#01-0 will be configured into PPAR-ID 0. Continue?[y|n] : y
Start connecting PSB to PPAR. [3600sec]
0..... 30..... 60..... 90.....120.....150.....180.....210.....240.....
270.....300.....330.....360.....390.....420.....450.....480.....510.....
540.....570.....600.....630.....660.....690.....720.....750.....780.....
810.....840.....870.....900.....930.....960.....end
Connected PSB to PPAR.
Start configuring PSB to Logical Domains (LDoms) Manager. [1800sec]
0.....end
Configured PSB to Logical Domains (LDoms) Manager.
Operation has completed.
Note - Incorporation of a system board (PSB) with the addboard command also incorporates
the targeted hardware resources on the system board (PSB) into the physical partition after a
hardware diagnosis is performed. Therefore, command execution may take some time to
complete.
c. Execute the showresult command to confirm the end status of the
XSCF> showresult
0
d. Execute the showboards command to check the system board (PSB) status.
the system board (PSB) status.
In the following example, system board 01-0 is in the system board pool.
board (PSB) into the physical partition.
The following example incorporates system board 01-0 into physical partition
0.
previously executed addboard command.
In the following example, 0 is returned as the end status, so the execution of
the addboard command has completed correctly.
Confirm that the added system board (PSB) is in the "Assigned" state and "y"
is displayed for all of the [Pwr], [Conn], and [Conf] columns.
In the following example, since both the [Conn] and [Conf] fields display "y"
for system board 01-0, the system board (PSB) has been added correctly.
Chapter 9 Installing a System with a Building Block Configuration 249