Assigning Cpu Core Resources - Fujitsu M10 Installation Manual

3.
Open the relevant file (XXXX_XX_001.TXT), and copy the contents of the key.
4.
Execute the addcodactivation command to register the CPU Activation key.
Specify the CPU Activation key by enclosing it in double quotation marks. You
can enter the CPU Activation key by copying and pasting all of its contents.
Enter "y" for the confirmation message.
In the following example, a CPU Activation key for two CPU cores is registered.
XSCF> addcodactivation "Product: SPARC M10-x
SequenceNumber:xxxx
Cpu: noExpiration 2
Text-Signature-SHA256-RSA2048:
PSSrElBrse/r69AVSVFd38sT6AZm2bxeUDdPQHKbtxgvZPsrtYguqiNUieB+mTDC
nC2ZwUq/JjogeMpmsgd8awSphnJkpbud/87PkP4cUvz/sCPv5xM5M/J+94a3vvEh
IhfmafmVhnvpLvS1Umm6iypOXMASHpPjkWqRt1qvSNwYAYwO0mGXLCUNggamQ4dm
3K3taCYr7WmEEWaUt+H9k84bRTKIlSkePdRuBTrtzUoDRJ2oY3IM6M1/9tRYOMGH
BSr0n0kS0Hfl5hspsbpwTZwozuSayXOSgOZf+su04mri77VisyrfEGpnY053Ye3N
b1GCkFx1RH27FdVHiB2H0A=="
Above Key will be added, Continue?[y|n]: y
5.
Execute the showcodactivation command, and confirm that the CPU
Activation key is registered with the XSCF.
XSCF> showcodactivation
Index Description Count
------- ----------- ------
0 PROC 2
7.12

Assigning CPU Core Resources

Assign the CPU core resources made available by a CPU Activation key to a physical
partition.
1.
Execute the setcod command to assign the CPU core resources to the
physical partition.
Specify a PPAR-ID for -p ppar_id. For permits, specify the number of CPU
Activations to assign to the PPAR.
XSCF> setcod -p ppar_id -s cpu permits
The following example assigns four CPU cores to physical partition 0.
XSCF> setcod -p 0 -s cpu 4
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
222