7.5.1
Setting an XSCF host name and domain name
1.
Execute the showhostname command to display host names.
The following example displays the factory default settings.
XSCF> showhostname -a
bb#00:localhost.localdomain
bb#01:localhost.localdomain
2.
Execute the sethostname command to set a host name.
For hostname, specify the host name to set. For xscfu, specify the chassis for the
setting. You can specify it as follows depending on the system configuration:
- M10-1/M10-4/M10-4S (no crossbar box): bb#00, bb#01
- M10-4S (with crossbar boxes): xbbox#80, xbbox#81
XSCF> sethostname xscfu hostname
The following example sets the host name scf0-hostname for BB#00 and the host
name scf1-hostname for BB#01.
XSCF> sethostname bb#00 scf0-hostname
XSCF> sethostname bb#01 scf1-hostname
The following example sets the host name scf0-hostname for XBBOX#80 and the
host name scf1-hostname for XBBOX#81.
XSCF> sethostname xbbox#80 scf0-hostname
XSCF> sethostname xbbox#81 scf1-hostname
The following example sets the domain name example.com for the master XSCF
and standby XSCF.
XSCF> sethostname -d example.com
7.5.2
Setting an Ethernet (XSCF-LAN) IP address
The XSCF-LAN is a LAN established for user access to the XSCF. Two XSCF-LAN
ports can be used, depending on the network configuration.
Fujitsu M10/SPARC M10 Systems Installation Guide ・ July 2015
204