Fujitsu M10 Installation Manual page 140

Note - After removing or loosening the screw or screws, hold the rail level with both hands.
If the rail tilts, it may stretch.
Figure 3-70 Screw on the side of the Type-1 rail
FRONT FRONT
Figure 3-71 Screws on the side of the Type-2 rail
FRONT FRONT
5.
Attach the rail to the rack.
Note - After removing its screw, hold the rail level with both hands. If the rail tilts, it may
stretch.
- For the Type-1 rail
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
126
A
B
C
B
A
FRONT FRONT
B
FRONT FRONT