Confirming The Delivered Components Of The Pci Expansion Unit; Confirming The Delivered Components Of An Expansion Rack - Fujitsu M10 Installation Manual

the delivered components of an expansion
2.
Check for incomplete engagement, incomplete contact, or looseness in the
mounting of a PCI Express card or internal disk that may have been caused
by vibration during transportation or moving of the equipment.
3.2.4 Confirming the delivered components of the PCI
expansion unit
This section describes the confirmation of delivered components of the PCI
expansion unit.
1.
Confirm the delivered components by referring to the List of Attachments that
comes with the PCI expansion unit.
Table 3-6
may change without notice.
Table 3-6 Reference: List of accessories for the PCI expansion unit
Name
PCI expansion unit
Power cord
Core
Rack mount kit
Cable support
Link cable (optical, 10 m)
Link cable (electrical, 3 m)
Management cable
Link card
*1 The power cord is ordered separately (required option), so it may not come with the product.
*2 If ordered at the same time as the SPARC M10, the cable is supplied with the SPARC M10.
*3 If ordered at the same time as the SPARC M10, the card is shipped mounted in the SPARC M10.
2.
Check for incomplete engagement, incomplete contact, or looseness in the
mounting of a PCI Express card that may have been caused by vibration
during transportation or moving of the equipment.
3.2.5 Confirming the delivered components of an
expansion rack
An expansion rack is a dedicated rack required for connecting each SPARC M10-4S
below is a list of accessories for the PCI expansion unit. The accessories
Quantity Remarks
1
2 For 100 VAC or 200 VAC (*1)
2 Used when attached to power cord
1 set
1 set
2 Either of two types of cables is selected (*2)
1 (*2)
1 Card for mounting in the SPARC M10-1/M10-4/M10-4S
chassis (*3)
rack."
Chapter 3 Installing the System 71