Fujitsu M10 Installation Manual page 130

Figure 3-55 Attaching the cable support
For the Type-2 cable support
●
a. Tilt the cable support to align the circular holes at the rear of the groove with
Figure 3-56 Attaching the cable support (1)
D
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
116
REAR
C
(M3 screws)
the two screws of a cable support fixing bracket (D in
Level the cable support. Then, align the circular holes at the other side with the
two screws, and attach it.
Circular hole
sections
Figure 3-56), and attach it.
REAR