Confirming The Delivered Components Of The Sparc M10-4S - Fujitsu M10 Installation Manual

2.
Check for incomplete engagement, incomplete contact, or looseness in the
mounting of a PCI Express card or internal disk that may have been caused
by vibration during transportation or moving of the equipment.
3.2.3 Confirming the delivered components of the
SPARC M10-4S
This section describes the confirmation of delivered components of the SPARC M10-4S.
1.
Confirm the delivered components by referring to the List of Attachments that
comes with the SPARC M10-4S.
Table 3-4
accessories required for a building block configuration. The accessories may
change without notice.
Table 3-4 Reference: List of accessories for the chassis
Name
SPARC M10-4S chassis
Fujitsu M10/SPARC M10 Systems Getting Started Guide
(*)
Fujitsu M10/SPARC M10 Systems Important Legal and
Safety Information
CPU Activation CD-ROM
Power cord
Serial cable
Rack mount kit
Cable support
*1 If the chassis is shipped mounted on a rack, this component is mounted on the rack.
*2 The disk contains the CPU Activation key information. One disk is supplied with the system.
*3 The power cord is ordered separately (required option), so it may not come with the product.
Table 3-5 List of accessories for a building block configuration (for direct connections between chassis)
Name
Crossbar cable
XSCF BB control cable (2 m)
XSCF DUAL control cable
*1 There are 8 cables for the 2BB configuration, 24 cables for the 3BB configuration, and 48 cables for the 4BB configuration.
*2 There is 1 cable for the 2BB configuration, 3 cables for the 3BB configuration, and 5 cables for the 4BB configuration.
Note - In a configuration with an expansion rack, the crossbar cable, XSCF BB control cables,
and XSCF DUAL control cable are already laid in the rack. For details, see
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
70
below is a list of accessories for the SPARC M10-4S.
Quantity
1
1
1
1
2
1
1 set
1 set
Quantity
(*1)
(*2)
1
Remarks
(*1)
(*2)
For 200 VAC (*3)
(*1)
(*1)
Remarks
Electrical cable connected between crossbar units
Cable connected between XSCF units
Cable connected between XSCF units of the
master XSCF and standby XSCF
Table 3-5 is a list of
"3.2.5 Confirming