Size And Weight; Confirming Rack Specifications; Mounting Conditions For General Racks - Fujitsu M10 Installation Manual

2.3.1

Size and weight

Table 2-2
Table 2-2 Physical specifications of each chassis
Item
Height
Width
Depth
Weight 18 kg
2.4

Confirming Rack Specifications

Use a rack that meets the specified conditions for using the SPARC M10-1 or SPARC
M10-4 in a standalone configuration or using the SPARC M10-4S in a configuration
up to the 4BB configuration (direct connections between chassis).
If the SPARC M10-4S will be used with connections through crossbar boxes, an
expansion rack with crossbar boxes mounted must be ordered.
The expansion racks are divided according to expandability as expansion rack 1 and
expansion rack 2. For a configuration with up to 8 units connected, an order for
expansion rack 1 is necessary. For a configuration with 9 to 16 units connected, an
additional order for expansion rack 2 is necessary.
This section describes the items that must be confirmed to use a rack
2.4.1

Mounting conditions for general racks

This section describes the rack mounting conditions for each system configuration.
lists the size and weight of each chassis.
SPARC M10-1 SPARC M10-4
42.5 mm 175 mm
(1.7 in.) (6.9 in.)
(1U) (4U)
431 mm 440 mm
(17.0 in.) (17.3 in.)
721 mm 746 mm
(28.4 in.) (29.4 in.)
58 kg
SPARC M10-4S
175 mm
(6.9 in.)
(4U)
440 mm
(17.3 in.)
810 mm
(31.9 in.)
60 kg
Chapter 2 Planning and Preparing for System Installation
Expansion rack PCI expansion
unit
2,000 mm 86 mm
(78.7 in.) (3.4 in.)
(2U)
700 mm 440 mm
(27.6 in.) (17.3 in.)
1,050 mm 750 mm
(41.3 in.) (29.5 in.)
780 kg 22 kg
23