Fujitsu M10 Installation Manual page 151

Figure 3-85 Attaching the cable support
C
(M3 screws)
For the Type-2 cable support
●
a. Tilt the cable support to align the circular holes at the rear of the groove with
the two screws of a cable support fixing bracket (D in
Level the cable support. Then, align the circular holes at the other side with the
two screws, and attach it.
Figure 3-86 Attaching the cable support (1)
D
Circular
hole sections
REAR
REAR
Chapter 3 Installing the System
Figure 3-86), and attach it.
137