Fujitsu M10 Installation Manual page 136

Figure 3-62 Type-2 cable support
Reference: Old
Figure 3-63 Type-2 rail
2.
Confirm that the rack is fixed in place to prevent the rack from toppling over.
For details, see
3.
Step 3 differs depending on the shape of the supporting column holes of the
rack. Perform the work appropriate to the shape of the supporting column
holes of the rack.
For racks with supporting columns having angled holes
Attach cage nuts to the left and right supporting columns of the rack.
- Attachment locations in the front supporting columns: (From the bottom) 1U
- Attachment locations in the rear supporting columns: (From the bottom) 1U
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
122
New
"3.3.2 Securing the
center and 2U bottom
center and 2U center
New
(Dedicated to PCI
expansion unit)
rack."
Reference: Old
(Common to
M10-4/4S)