Fujitsu M10 Installation Manual page 232

2.
To change the CPU mode to "compatible" mode, execute the setpparmode
command and set the CPU Mode to "compatible".
XSCF> setpparmode -p 0 -m cpumode=compatible
Diagnostic Level :max -> -
Message Level :normal -> -
Alive Check :on -> -
Watchdog Reaction :reset -> -
Break Signal :on -> -
Autoboot(Guest Domain) :on -> -
Elastic Mode :off -> -
IOreconfigure :true -> -
CPU Mode :auto -> compatible
PPAR DR :off -> -
The specified modes will be changed.
Continue? [y|n] : y
configured.
Diagnostic Level :max
Message Level :normal
Alive Check :on (alive check:available)
Watchdog Reaction :reset (watchdog reaction:reset)
Break Signal :on (break signal:non-send)
Autoboot(Guest Domain) :on
Elastic Mode :on
IOreconfigure :false
CPU Mode :compatible
PPAR DR :off
3.
Execute the showpparmode command, and confirm that the CPU Mode of the
physical partition has been set to "compatible".
XSCF> showpparmode -p 0
Host-ID :0f010f10
Diagnostic Level :min
Message Level :normal
Alive Check :on
Watchdog Reaction :reset
Break Signal :on
Autoboot(Guest Domain) :on
Elastic Mode :off
IOreconfigure :true
CPU Mode :compatible
PPAR DR(Current) :off
PPAR DR(Next) :off
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
218