NEC UNIVERGE UM8000 User Manual page 225

Configuring a Barge-in Code for Live Record
Subscribers use the live record feature to record phone conversations if the phone system supports live record. The
conversations are stored as voice messages in the subscriber voice mailbox. Program a barge-in code to enable the
messaging system to tap into a call and record the call.
Local laws might require a periodic beep while a conversation is being recorded, the beep interval is configurable.
CAUTION!
T ,
HE USE OF MONITORING RECORDING OR LISTENING DEVICES TO EAVESDROP
,
OTHER SOUND ACTIVITIES
UNDER FEDERAL OR STATE LAWS
ANY PHONE CONVERSATION
,
CONVERSATION SUCH AS USING A BEEP TONE OR OTHER NOTIFICATION METHODS OR REQUIRING THE CONSENT OF ALL PARTIES TO THE
,
PHONE CONVERSATION PRIOR TO MONITORING OR RECORDING THE PHONE CONVERSATION
.
PENALTIES
Barge-in Codes
When a barge-in code is dialed, the messaging system taps into the line and records the call. The barge-in code should
be set to initiate the executive override function, which requires a busy tone.
For example, if the phone system executive override function is initiated by dialing the extension, followed by a long
pause, then a hookflash (&), followed by a short pause, then *4, then type X;&,*4 in the code field.
To configure barge-in codes for live record
In the Navigation Pane, click System > Switch > Live Record.
1.
For detailed field information, see the
Type the barge-in code for the phone system in the Barge-in field.
2.
Type the number of seconds between beeps while a conversation is recorded in the Live record beep interval
3.
field. Select any value between 0 and 60 seconds for the beep interval.
Set the beep interval to 0 (zero) to turn off the beep. The messaging system provides the beep when live record is
activated from the subscriber phone. The phone system must be programmed to provide the beep interval when
live record is activated within ViewMail.
NOTE
T
HE BEEP INTERVAL DOES NOT APPLY TO LIVE RECORD SESSIONS INITIATED FROM THE
Click Save.
4.
Related Topics
Phone System Overview
Configuring Subscriber Live Record Settings
Enabling Live Monitor for a Subscriber
Phone System Overview
WHETHER OR NOT CONTEMPORANEOUS WITH TRANSMISSION
. L
EGAL ADVICE SHOULD BE SOUGHT PRIOR TO IMPLEMENTING ANY PRACTICE THAT MONITORS OR RECORDS
. S
OME FEDERAL AND STATE LAWS REQUIRE SOME FORM OF NOTIFICATION TO ALL PARTIES TO A PHONE
System > Switch > Live Record
, ,
MONITOR RETRIEVE OR RECORD PHONE CONVERSATIONS OR
,
CAN BE ILLEGAL IN CERTAIN CIRCUMSTANCES
. S
OME OF THESE LAWS INCORPORATE STRICT
table.
V M
ISUAL ESSAGING APPLICATIONS
.
225