NEC UNIVERGE UM8000 User Manual page 307

Configuring the Remote Site Template
Use this page to configure the default parameters for the remote sites. The template applies the default settings to new
remote sites when they are added to the messaging system. If you change the default settings and have existing
remote sites, the remote site settings must be manually updated.
The default settings configured on the template includes maximum failed calls allowed, restrictions, message delivery
phone numbers (maximum of two), message delivery schedules, rings to wait, notification intervals, and delivery
methods.
Configuring Message Delivery for a Remote Site
The Message Delivery fields specify the times that calls to remote systems can be initiated. The system only initiates
calls during the specified hours. By limiting the schedule to times that long-distance toll charges are lowest you
minimize the cost of message networking calls.
The message delivery schedule must be specified for each remote site. Each remote site must be configured to accept
network calls during the same time period.
To configure general networking parameters
In the Navigation Pane, click Network > Template Remote Sites.
1.
For detailed field information, see the
In the Maximum failed calls allowed field, select the number of times delivery calls are allowed to fail before
2.
preventing subscribers from sending messages to subscribers at the remote site.
In the Restrictions section select the appropriate restrictions:
3.
• Outgoing. To prevent the local site from making message delivery calls to the remote site.
• Screen. To prevent the local site from accepting message delivery calls from the remote site.
NOTE
W Outgoing
HEN BOTH
. I
REMOTE SITE F NEITHER
FROM THE REMOTE SITE
In the Message Delivery section:
4.
Type up to two phone numbers to deliver messages to the remote site. Include the outdial access code and
a.
other dialing codes needed.
Specify a Delivery Interval start and end times.
b.
Specify the Schedule, selecting the days of the week.
c.
Specify the number of Rings to wait.
d.
Specify a Notification Interval in minutes. The frequency of notification deliveries.
e.
Select a message Delivery method:
f.
• On. Delivers messages to remote sites according to the time specified in the Delivery schedule field. All
messages to remote sites are delivered at once. The messaging system waits for the specified delivery
interval before retrying the designated number if the first message delivery is unsuccessful.
• Off. Turns off message delivery to the number.
Click Save.
5.
Related Topics
Message Networking Configuration
®
UNIVERGE UM8000 Message Networking
Adding a New Remote Site
Configuring the Local Site
Understanding Directories
®
UNIVERGE UM8000 Message Networking
Network > Template Remote Sites
Screen
AND ARE SELECTED
Outgoing Screen
OR
.
,
THE LOCAL SITE DOES NOT CALL THE REMOTE SITE OR ACCEPT CALLS FROM THE
,
IS SELECTED THE LOCAL SITE CAN CALL THE REMOTE SITE AND ACCEPT CALLS
table.
307