NEC UNIVERGE UM8000 User Manual page 384

Call Management > System Operator Box - Messages
Field
Allow callers to change
messages they just
recorded
Allow callers to leave
urgent messages
Mark all messages
urgent
Maximum message
length to record from an
unidentified caller
After taking a message
Page Field Descriptions
Description
Callers can change messages they have just recorded. Clear
the field to prevent changes.
Asks unidentified callers if they want to mark a message as
urgent. Clear the field to prevent unidentified callers from
marking messages as urgent.
Marks all messages from unidentified callers as urgent.
Sets the maximum length of a message, in seconds, from an
unidentified caller. This setting applies only if the Take a
message action was selected on the System Operator Box >
Greetings page.
Specifies what the system does after recording a message
from the caller. This setting applies only if the Take a
message action was selected on the System Operator Box >
Greetings page. Select one of the following:
• Route to. Routes the caller to another system ID. If
selected, type the system ID or click Search and select a
system ID.
• Route to operator.
operator box. This setting is not recommended for use
with the system operator box.
• Hang up. Disconnects without saying good
• Say bye. Plays a prompt asking if the caller needs
further assistance, pauses to wait for the caller to make a
selection, if there is no response, says good-bye and
disconnects.
• Restart. Returns the caller to the opening greeting box.
This setting is not recommended for use with the system
operator box.
Routes the caller to the system
-
bye.
384