NEC UNIVERGE UM8000 User Manual page 52

Overlapping Room Extension Numbers
When the phone system uses overlapping room numbers of different lengths such as 110 and 1102, the messaging
system must be able to distinguish between the numbers to correctly transfer a call or send a message lamp on or off
code.
ID entry delays are used to help differentiate overlapping room numbers. The ID entry delay prevents the messaging
system from transferring a call or sending a lamp code until the complete extension number has received. To enable
this delay a Tall hotel delay entry must be specified. Without this setting extension 1102 never receives a call or has the
lamp lit.
The Tall hotel fields are used whenever overlapping extension numbers exist.
To configure the messaging system for overlapping room extension numbers
In the Navigation Pane, click System > Configuration > Hospitality Settings.
1.
Select Tall hotel for overlapping extensions.
2.
Confirm that the Tall hotel ID entry delay...seconds field has a delay appropriate for the phone system. The
3.
default delay is 2.
In the Navigation Pane, click the System > Switch > Switch Information page.
4.
Type (three commas which are pauses) to the end of any existing string in the Integration options field.
TIA,,,
5.
Spaces separate the different strings, as shown below:
F0 ISVM=10,15 INT=DIGITAL RCV=6 TIA,,,
In the Navigation Pane, click the Switch > MWI page.
6.
Locate the On (activation) code and Off (deactivation) code fields and type two commas (
7.
the end of the existing codes in these two fields.
Click Save.
8.
Related Topics
Configuring Basic Hospitality Settings
Hospitality Site Configuration
System Configuration
,, ) immediately at
52