NEC UNIVERGE UM8000 User Manual page 8

Logging On and Logging Off for System Managers
The messaging system requires system managers to have valid credentials to log on to the Administration Console. The
procedures in this help system assume that you have already logged on using system manager credentials.
If you plan to remotely access the Administration Console using the Internet, the messaging system server must be
connected to a network with a secure connection to the Internet. The messaging system server should not be
connected to the Internet or a Wide Area Network (WAN) without a firewall. If access to the messaging system using
remote locations through a WAN is necessary, it should be allowed only through a secure Virtual Private Network (VPN)
such as PPTP, L2TP, or IPSec.
To log on as system manager
NOTE
Y
OU CANNOT ACCESS THE
. Y
BOARD OU MUST LOG ON TO THE
If the messaging system software is not running, start it.
1.
See Shutting Down and Restarting the Messaging System
On a workstation attached to the same network as the messaging system, open a Web Browser window.
2.
On the Browser window, click File > Open.
3.
Type the IP address of the messaging system server followed by
4.
http:// /admin
10.3.0.1
Where 10.3.0.1 is the IP address of a messaging system server.
Type a system manager ID in the User field:
5.
• If this is a new system, use
• If this is an existing system, type your personal ID.
In the Password field, type the appropriate security code:
6.
• If this is a new system, leave the Password field blank.
• If this is an existing system, type your password.
Select a language from the language list.
7.
Click Log On.
8.
The Administration Console Main Menu appears.
To log off of the messaging system
• Click Logoff on the taskbar of any Administration Console page.
Related Topics
Administration Console Overview
Server Control
Navigating the Administration Console
A C
DMINISTRATION ONSOLE USING A MONITOR AND
A
DMINISTRATION
$sandy$nec
USB
C
ONSOLE USING A NETWORK CONNECTION
Software.
/admin
.
KEYBOARD CONNECTED TO THE MESSAGING SYSTEM
.
, then press ENTER. For example:
8