NEC UNIVERGE UM8000 User Manual page 452

System > Switch > Switch Extensions
Field
Edit All
Cancel All
Port
Status
Open Line ID
Schedule
Language
Options
Rings to answer
Extensions
Action
Fax ports
Page Field Descriptions
Description
Click to edit all switch extensions.
Click to cancel all changes made to all switch extensions.
The number of the incoming phone line represented by each
row in table.
Select one of the following values to set the port status. The
status indicates how the messaging system uses the port to
answer and route calls, and dial numbers for outgoing calls.
• A/D (Answer/Dial out). Answers incoming calls. When
not answering calls, dials out to activate message waiting
indicators and deliver new messages.
• A/L (Answer/Light lamps). Answers incoming calls.
When not answering calls, dials out to activate message
waiting indicators.
• A/M (Answer/Message delivery). Answers incoming
calls. When not answering calls, dials out and delivers new
messages.
• Ans (Answer only/No dial out). Answers incoming
calls.
• Busy. Connects to dial tone. Use for testing or to
temporarily take a port off line.
• Dial (Dial out only). Dials out to activate message
waiting indicators and deliver new messages.
- -
• DID (Direct inward dial). Only answers
- -
direct inward dial (DID) calls.
• Lamp (Light lamps). Dials out to activate message
waiting indicators.
• MD (Message delivery). Dials out to deliver new
messages.
• Off. Turns the port off. No calls answered, no calls dialed.
The system ID for the opening greeting box that answers this
port.
The number of the schedule (1
port.
Select the language for the port.
Controls the way the messaging system works with special
phone system hardware and other hardware. Depending on
the hardware installed, may accept one or more of the
following values:
• FC-Forwarded calls. The system does not transfer the
call to the first extension ID entered during a call on the
port.
• NL-No LAN connects. Restricts Visual Messaging
applications from using these ports.T1
system checks for loop current after dialing, which is
required on ports using T1 for dialing out.
The number of times a call rings before the messaging
system answers it.
The extension number of the phone system line that is
connected to the voice port.
Click Edit to edit this port only. Click Cancel to exit edit
mode and abandon any changes made to this port.
-
4) you want to attach to the
The messaging
452