NEC UNIVERGE UM8000 User Manual page 451

Integration Options
TM <first trunk>–<last
trunk>=<system ID>
Trunk Map.
IP Switch Options
Field
Primary server address
Primary server domain
name
Secondary server
address
Secondary server
domain name
Own domain name
Proxy
Sip base port
RTP base port
DTMF send method
Peer to Peer
Page Field Descriptions
Description
Maps trunk calls to specific system IDs, where <first trunk>
is the number of the first trunk in the range, <llast trunk> is
the number of the last trunk in the range and <system ID>
is the system ID. For example, type tm1
trunks 1, 2, and 3 to box ID 987.
To map to more than one system ID, follow the first range of
trunk numbers with a comma and then the next range of
trunk numbers and system ID. For example,
- -
tm1 3=987,4 6=988 maps trunks 1, 2 and 3 to transaction
box 987 and trunks 4, 5, 6 to fax box 988.
Program trunks to ring directly to the messaging system
ports. If an invalid system ID is specified for a trunk, the
system plays the message "I'm sorry, I did not hear your
selection" to callers on that trunk.
Description
Type the IP address of the primary server.
Type the Domain name of the primary server.
Type the IP address of the secondary server.
Type the Domain name of the secondary server.
Type the Domain name of the messaging system
server.
The IP address of the SIP Proxy server. This field
only appears when an appropriate SIP integration is
selected on the Switch > Switch Information page.
The port used for SIP communications. This field
only appears when an appropriate SIP integration is
selected on the Switch > Switch Information page.
The port assigned for RTP communications. This
field only appears when an appropriate SIP
integration is selected on the Switch > Switch
Information page.
Specifies the method the switch uses to transmit
DTMF (touchtone). Select either Inband,
- -
Info DTMF relay, Info DTMF, or RFC 2833.
Select if the network connection to the telephone
- -
system is a Peer to Peer network.
-
3=987 to map
451