NEC UNIVERGE UM8000 User Manual page 458

System > Switch > Message Waiting Indication
Field
Enable message waiting
indication
Message Waiting Indicator codes
On (activation) code
Off (deactivation) code
Maximum number of
retries ... times
Wait ... minutes
between retries
Reset
Reset MWI daily at
Reset MWI after each
new message
Reset all lamps
Page Field Descriptions
Description
Select to enable message waiting indication systemwide.
When not selected, disables message indication.
NOTE
W
HEN THIS FEATURE IS DISABLED THE FIELDS IN THE
M W I
ESSAGE AITING NDICATOR
. T
DISABLED HE CONTENTS OF THE FIELDS ARE RETAINED
THAT IF MESSAGE WAITING INDICATION IS REACTIVATED THE
. S
SETTINGS RETURN ELECT
Save
AFTER DISABLING THEN ENABLING THE MESSAGE
.
WAITING INDICATION
Contains the codes to turn on message waiting indication.
The codes must include "X" which represents the extension
number.
Contains the codes to turn off message waiting indication.
The codes must include "X" which represents the extension
number.
The number of times the system resounds the Message Lamp
On or Off sequence to subscriber extensions. Retries might
be necessary when circumstances prevent the activation of a
message waiting indicator on the first attempt.
The number of minutes the messaging system waits between
retries.
The time for daily reset of message waiting indication. Each
day at the time specified, the system activates message
waiting indication for all subscribers with new messages.
The system immediately resets a subscriber's message
waiting indicator after each new message.
The messaging system immediately resets all message
waiting indicators and reactivates message waiting indication
for all subscribers with new messages.
C
ODES SECTION ARE
,
SO
Reset all lamps,
THEN CLICK
458