NEC UNIVERGE UM8000 User Manual page 82

Configuring the System Operator Profile
The operator system ID
extension while listening to the opening greeting or at any time the system is listening for an ID.
The default system ID for the system operator is 0 (zero), but this can be changed. The operator system ID does not
have to match the operator extension.
To change system operator box settings
In the Navigation Pane, click Call Management > System Operator Box > Profile.
1.
The System Operator Box Profile page appears. For detailed field information, see the
Operator Box - Profile
In the System ID field, type the new system ID for the system operator box. The default value is 0.
2.
Click the Voice name
3.
See To record or rerecord a voice name or greeting on the Administration Console
Select a language from the Language list for multilingual messaging systems.
4.
Use the Alternate system IDs for special operators on each port field to route port calls to the operator box.
5.
Type:
<port numbers> = <operator box>
Where <port numbers> is the system ID for the port or range of ports, and <operator box> is the operator box
system ID. For example,
NOTE
C
ONFIGURE A SEPARATE TRANSACTION BOX FOR EACH ALTERNATE OPERATOR
Click Save.
6.
Related Topics
Configuring System Operator Box Call Transfer
Steps for Configuring the System Operator Box
Deleting System Operator Box Messages
Opening Box Overview
System Operator Overview
is the number that callers use to connect to the system operator. Callers can press this
table.
button to record a name for the system operator box.
or -
1=1234 1 16=1234
.
. S Assigning a System Operator Box to a
EE
Call Management > System
for details.
Port.
82