NEC UNIVERGE UM8000 User Manual page 457

System > Switch > Dialout
CAUTION!
C
ONSULT WITH TECHNICAL SUPPORT OR A LICENSED PHONE TECHNICIAN BEFORE CHANGING ANY VALUES ON THIS PAGE
Field
Dialout pause time definition
Comma (,) =...
milliseconds
-
Semi colon (;) =...
milliseconds
Hookflash time definition
Ampersand (&) =...
milliseconds
Percent (%) =...
milliseconds
Dialtone delay...
milliseconds
Dialout DTMF duration...
milliseconds
DTMF interdigit delay...
milliseconds
Page Field Descriptions
Description
The number of milliseconds
(,) in a dialing sequence.
The number of milliseconds the system pauses a semi
(;) in a dialing sequence.
The number of milliseconds the system pauses for an
ampersand (&) in a dialing sequence.
The number of milliseconds the system pauses for hookflash
for a percent sign (%) in a dialing sequence.
The number of milliseconds the system waits for a dial tone
before it places a call.
The number of milliseconds for the length of the touchtone.
-
For PLUSNET 1 sites, this value ranges from 8–50; for all
other sites, the range is 5–50.
The number of milliseconds the system waits between
touchtones when dialing.
-
For PLUSNET 1 sites, this value ranges from 8 to 50; for all
other sites, the range is 5–50. This range might need to be
changed if optional packages are installed.
the system pauses for a comma
-
colon
.
457