NEC UNIVERGE UM8000 User Manual page 456

System > Switch > Incoming Calls
CAUTION!
C
ONSULT WITH TECHNICAL SUPPORT OR A LICENSED PHONE TECHNICIAN BEFORE CHANGING ANY VALUES ON THIS PAGE
Field
Ringing
-
Ring on time...
milliseconds
-
Ring off time...
milliseconds
Wait through a complete
ring on an incoming call
before answering
Answering
-
Off hook delay...
milliseconds
Pooled delay...
milliseconds
Disconnecting
Release on loop current
reversal (LCR)
Use Station Numbers to
disconnect looped calls
Page Field Descriptions
Description
Used by the messaging system with the ring
to identify a ring signal. The ring signal consists of voltage
that alternates on and off. The field accepts the length (in
tenths of a second) for the "on" period in the ring cycle. For
example, set it to 10 for an "on" period of 1 second.
Used by the messaging system with the ring
to identify a ring signal. The ring signal consists of voltage
that alternates on and off. Accepts the length (in tenths of a
second) for the "off" period in the ring cycle. For example,
set it to 40 for an "off" period of 4 seconds.
When selected, the messaging system waits through a
complete ring on an incoming call before answering.
Otherwise, the system can answer in mid
Wait the specified amount of time (in milliseconds) after
answering a call before playing a prompt or accepting
touchtones.
The length of time that the system waits for the ring signal to
settle after answering a call when the lines are set for pooled
ringing. The system ignores any ring signals received during
this waiting period. The pooled delay can be modified for
systems that do not quickly stop the ring signal to other
ports.
When selected, the messaging system assumes that the
caller has hung up when the system receives a loop current
open signal from the phone system.
When selected, if an answering port receives a call
originating from another voice mail port, it immediately
terminates the call. This feature only works on phone
systems that provide both calling station and forwarded
station identification.
-
off time setting
-
on time setting
-
ring.
.
456