Toshiba GR200 Series Instruction Manual page 196

Earth fault protection (EF)
The earth fault protection (EF) function has four stages (elements); each element can have
either a directional characteristic or non-directional characteristic.
To simplify the description, only EF1 is discussed but is applicable to the other EFs; hence,
read the expression for EF1 as EF2, EF3 and EF4 at each EF stage unless a special explanation
or instruction has been provided.
─────────────────────────────────────────────────────────────────
Note: The implementation of particular features is dependent upon the selection of
hardware and the configuration of functions. Several IED models do not support certain
features. To determine whether a particular feature has been implemented within an IED,
identify the IED ordering number; and check the order number for the "G&T position" whilst
referring to the comparison table below. For more information, see
Table 2.6-1 Comparative table in respective ordering numbers
✓: Applicable
Sec. Feature
– DT characteristic
– IDMT characteristic
NA: Not applicable
- 175 -
Ordering No. at "G&T"
31 32
✓ ✓
✓ ✓
6F2S1915 (0.46)
Appendix: Ordering
.
GRZ200 (Soft 031 & 032)