Download Print this page

Toshiba GR200 Series Instruction Manual page 200

Hide thumbs Also See for GR200 Series:

Advertisement

in section (v).
Operate time of IDMT
(iii)
The dependent time in the IDMT is defined by Equation (2.6-4). (ref IEC 60255-151):
where:
t = operating time for constant current I (seconds),
I = energizing current (amperes),
Is = earth fault current setting (amperes),
TMS = time multiplier setting,
k, α, c = constants defining curve.
The nine pre-programmed standard characteristic curve are defined in Table 2.6-2. In
addition, one original (user-programmable) curve can be applied. One curve can be chosen for
each EF stage. Figure 2.6-3 illustrates these characteristic curves. For example, the user
should set one for the scheme switches [EF1-Timer]. (That is, "IEC-NI" is for IEC Normal
Inverse, "IEC-VI" for IEC Very Inverse, "IEC-EI" for IEC Extremely Inverse, "UK-LTI" for UK
Long Time Inverse, "IEEE-MI " for IEEE Moderately Inverse, "IEEE-VI" for IEEE Very Inverse,
"IEEE-EI" for IEEE Extremely Inverse, "US-CO2" for US CO2 short time inverse, "US-CO8" for
US CO8 inverse, and "Original" for user-programmable characteristic.)
In the IDMT operation, the user can also program the characteristic using time-
multiplier-setting (TMS) for the required operate time. For example, the IEC characteristic is
selected, the user can set the TMS value using the setting [EF1-TMS-IEC] (incidentally, the
default value of the TMS is 1.00). The other TMSs are also available by the [EF1-TMS-UK],
[EF1-TMS-IEEE], [EF1-TMS-US] and [EF1-TMS-ORG].
Curve type
(IEC 60255-151)
A
B
C
-
D
E
F
-
-
�� ( �� ) = ������ × {[
( I I
Table 2.6-2 Constants for IDMT
Curve Description
IEC Normal Inverse (IEC-NI)
IEC Very Inverse (IEC-VI)
IEC Extremely Inverse (IEC-EI)
UK Long Time Inverse (UK-LTI)
IEEE Moderately Inverse (IEEE-MI)
IEEE Very Inverse (IEEE-VI)
IEEE Extremely Inverse (IEEE-EI)
US CO8 inverse (US-CO8)
US CO2 short time inverse (US-CO2)
- 179 -
k
] + c}
α
⁄ )
− 1
s
k
0.14
13.5
80
120
0.0515
19.61
28.2
5.95
0.02394
6F2S1915 (0.46)
(2.6-4)
α
c
0.02
0
1
0
2
0
1
0
0.02
0.114
2
0.491
2
0.1217
2
0.18
0.02
0.01694
GRZ200 (Soft 031 & 032)

Advertisement

loading

This manual is also suitable for:

Grz200