Toro Groundsmaster 360 Service Manual page 118

Test Procedure
Hydraulic System: Testing the Hydraulic System
Perform the implement relief pressure test if you identify a steering or cutting
deck raise and lower problem. This test determines if the implement relief valve
is operating correctly.
1. Ensure that the hydraulic fluid is at normal operating temperature.
2. Ensure that the traction drive is correctly adjusted for the N
Before opening the hydraulic system, operate all the hydraulic
controls to release system pressure and avoid injury from the
pressurized hydraulic fluid; refer to
Hydraulic System (page
g036474
1. Deck lift manifold
g036475
1. Deck lift manifold
3. Park the machine on a level surface, lower the cutting deck, shut off the
engine, and set the parking brake.
CAUTION
Releasing Pressure from the
4–5).
Figure 54
2. Location of port 3
Figure 55
2. Port 3 plug
Page 4–60
position.
EUTRAL
Groundsmaster 360
16225SL Rev C