Blade Stopping Time; Cutting Deck - Toro Groundsmaster 360 Service Manual

Blade Stopping Time

Cutting Deck

Groundsmaster 360
16225SL Rev C
The blades of the cutting deck should come to a complete stop in less than 7
seconds after you disengage the PTO switch.
Note: When checking the blade stopping time, ensure that the deck is lowered
onto a clean section of turf or hard surface to prevent dust and unwanted material.
To check the blade stopping time, instruct a second person to stay away from
the machine at a safe distance and monitor the blades on the cutting deck.
When the machine operator disengages the cutting deck, record the time that it
takes for the blades to come to a complete stop. If this time is more than 7
seconds, inspect the PTO brake assembly in the transmission; refer to
Circuit Problems (page
Refer to specific Cutting Deck Operator's Manual for cutting deck removal and
installation procedure.
4–37).
Page 7–5
PTO
Cutting Deck: Service and Repairs