Toro Groundsmaster 360 Service Manual page 455

Removing the Air Conditioning Condenser Fan Assembly
Groundsmaster 360
16225SL Rev C
g036612
1. Condenser fan (2 each)
2. Fan plug (2 each)
g036613
1. Screw (4 each per fan)
2. Fan tab (4 each per fan)
3. Condenser fan (2 each)
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Locate the air conditioning condenser fan assembly that is secured to the
frame under the rear of the cab headliner.
3. Disconnect the 2 condenser fan plugs (item 2 in
harness connectors that are attached to the cab frame.
4. Support the condenser fan assembly to prevent it from falling.
5. Remove the 2 knobs (item 3 in
assembly to the machine.
Figure 325
3. Knob (2 each)
Figure 326
4. Plug (3 each)
5. Fan mount plate
Figure 325) that secure the condenser fan
Page 8–15
Figure 325) from the wire
Operator Cab: Service and Repairs