Toro Groundsmaster 360 Service Manual page 308

Testing the Windshield Washer/Wiper Switch (continued)
Electrical System: Testing the Electrical Components
Circuit Logic Table
Switch Position
O
FF
W O
IPER N
W O
ASHER N
6. Replace the windshield wiper/washer switch if testing determines that the
switch is damaged.
7. If the windshield wiper/washer switch testing is correct and a circuit problem
still exists, check the wire harness; refer to the Electrical Schematics and Wire
Harness Drawings/Diagrams in
8. After you complete the testing, connect the wire harness connector to the
windshield wiper/washer switch.
9. Secure the switch panel to the cab headliner with the removed fasteners.
10. Install the cab roof; refer to
Normal Circuits
2+1
2+3
2+3
Appendix A (page
Roof Assembly (page 8–10)
Page 5–72
Other Circuits
None
None
5+6
A–1)—Foldout Drawings.
Groundsmaster 360
16225SL Rev C