Toro Groundsmaster 360 Service Manual page 177

Assembling the Transmission (continued)
Groundsmaster 360
16225SL Rev C
g033439
1. Input shaft
2. Right pump shaft
16. Install the right and left pump shaft assemblies into the transmission pump
housing, and install the input shaft into the pump housing.
Note: Ensure that the gear teeth of the input shaft is aligned with the gears
on the PTO and pump shafts.
17. Lubricate the 2 new O-rings and install the O-rings into the grooves in the
pipe. Slide the pipe assembly into the bore of the transmission pump housing.
g033438
1. Gear case housing
2. Pump housing
18. Install the 2 pins into the transmission pump housing holes. Align new gasket
to the housing.
Figure 115
3. Left pump shaft
4. Pipe assembly
Figure 116
3. Pin (2 each)
Page 4–119 Hydraulic System: Service and Repairs