Toro Groundsmaster 360 Service Manual page 183

Assembling the Transmission (continued)
Groundsmaster 360
16225SL Rev C
g033428
1. Pump body
44. Place the pump body onto the center case and ensure that the O-rings
remain in position. Install the 3 shorter and 2 longer flange-head screws to
attach the pump body to the center case; torque the screws to 23 to 26 N∙m
(17 to 19 ft-lb) in a crossing pattern.
g033427
1. Hex plug (2 each)
45. Lubricate new O-rings and install the O-rings onto the 2 hex plugs. Install the
plugs into the pump body; torque the plugs to 19 to 20 N∙m (14 to 15 ft-lb).
46. Apply sealant to the threads of the 4 socket-head plugs and install them into
the pump body; torque the plugs to 8.8 to 10.8 N∙m (78 to 95 in-lb).
Figure 126
2. Center case
Figure 127
2. Socket-head plug (4 each)
Page 4–125 Hydraulic System: Service and Repairs