Toro Groundsmaster 360 Service Manual page 171

Disassembling the Transmission (continued)
Groundsmaster 360
16225SL Rev C
g033448
1. Side cover
2. O-ring
3. Pump housing
64. Remove the 3 socket-head screws that attach the 2 side covers to the
transmission pump housing.
65. Carefully slide the side covers from the trunnion shafts and housing.
66. Remove and discard the O-rings from the side covers.
67. Remove the retaining rings that attach the oil seals into the 2 side covers.
68. Remove and discard the oil seals from the side covers.
g033449
1. Swash plate (2 each)
2. Washer
69. Carefully remove the swash plates from the transmission pump housing, and
remove the washer from each swash plate.
70. Clean and inspect all the transmission components.
Figure 103
4. Retaining ring
5. Oil seal
Figure 104
3. Pump housing
Page 4–113 Hydraulic System: Service and Repairs