Toro Groundsmaster 360 Service Manual page 69

Installing the Non-Adjustable Fittings (continued)
Flat From Finger Tight Table (continued)
Installing an Adjustable Fitting
Groundsmaster 360
16225SL Rev C
Size
12 (3/4 inch)
16 (1 inch)
g033773
1. Locknut
2. Back-up washer
g033774
1. Ensure that all the threads, the sealing surfaces of fitting, and the component
port are free of burrs, nicks, scratches, or unwanted material.
2. To help prevent a hydraulic leak, replace the O-ring when you open the
connection.
3. Lightly lubricate the O-ring with clean hydraulic fluid. Ensure that the threads
of the fitting are clean with no lubricant applied.
4. Turn back the locknut as far as possible. Ensure that the back-up washer is
not loose and it is pushed up as far as possible (Step 1 in
Figure 23
3. O-ring
Figure 24
Page 4–11
FFFT
1.50 ± 0.25
1.50 ± 0.25
Figure 24).
Hydraulic System: General Information