Toro Groundsmaster 360 Service Manual page 437

Removing the Gearbox
Groundsmaster 360
16225SL Rev C
g033723
1. Set screw installation position
g033724
1. Breather plug
2. Oil cap
3. Gearbox
4. Oil seal
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Lift the footrest to get access to the top of the cutting deck.
3. Support the raised footrest with the prop rod.
4. Remove the deck covers from the top of the cutting deck.
5. Remove the drive belt from the deck pulleys.
6. Disconnect the PTO driveshaft from the gearbox; refer to
PTO Driveshaft (page
7. Remove the 4 bolts (item 10 in
the gearbox assembly to the gearbox brackets.
Figure 315
2. Set screw removal position
Figure 316
5. Plug
6. Oil cap
7. Washer
6–44).
Figure 314) and 4 lock washers that attach
Page 7–17
Removing the
Cutting Deck: Service and Repairs