Toro Groundsmaster 360 Service Manual page 402

Disassembling the Cutting Deck Lift Assembly
Chassis: Service and Repairs
g037449
1. HOC bracket
1. Park the machine on a level surface with the cutting deck fully raised. Shut
off the engine, set the parking brake.
2. Note the location of the HOC pin in the HOC bracket for assembly purposes,
and remove the HOC pin from the HOC bracket
3. Start the engine and fully lower the cutting deck. Shut off the engine and
remove the key from the key switch.
Note: If the cutting deck is to be removed from machine; refer to the Cutting
Deck Operator's Manual.
4. Remove the lift arm components as shown in
Note: If the pull link assembly removal is necessary; refer to
Pull Links (page 7–19).
Figure 290
2. HOC pin
Page 6–50
(Figure 290).
Figure 289 and Figure
Cutting Deck
Groundsmaster 360
16225SL Rev C
291.