Special Tools; Hydraulic Pressure Testing Kit; Gpm Hydraulic Tester Kit (Pressure And Flow) - Toro Groundsmaster 360 Service Manual

Special Tools

Hydraulic Pressure Testing Kit

15 GPM Hydraulic Tester Kit (Pressure and Flow)

Groundsmaster 360
16225SL Rev C
You can order these special tools from your Toro Distributor. Some tools are
also available from a local tool supplier.
g031764
Toro Part No. TOR47009
Use this kit to take various pressure readings for diagnostic tests. Quick
disconnect fittings are provided to attach directly to the mating fittings on the
machine test ports without the tools. A high-pressure hose is given for remote
readings. Contains 1 each: 6,900 kPa (1,000 psi), 34,500 kPa (5,000 psi), and
69,000 kPa (10,000 psi) gauges; refer to
4–39).
g031765
Toro Part No. TOR214678
Use this tester to test the hydraulic circuits and components for flow and pressure
capacities as recommended in
tester includes the following:
1. Inlet Hose: This hose connects the system circuit to the inlet side of the
hydraulic tester.
2. Load Valve: Turn the valve to restrict the flow to create a simulated working
load in the circuit.
Figure 32
Testing the Hydraulic System (page
Figure 33
Testing the Hydraulic System (page
Page 4–27
4–39). This
Hydraulic System: Special Tools