Toro Groundsmaster 360 Service Manual page 304

Testing the Engine Speed Switch (continued)
Electrical System: Testing the Electrical Components
if continuity exists between the various terminals for each switch position.
Check the continuity between the switch terminals.
Circuit Logic Table
Switch Position
D
ECREASE
O
FF
I
NCREASE
Note: The engine speed switch terminals 4,5, and 6 are not used on the
Groundsmaster 360 machines.
8. Replace the engine speed switch if testing determines that the switch is
damaged.
9. If the engine speed switch testing is correct and a circuit problem still exists,
check the wire harness; refer to the Electrical Schematics and Wire Harness
Drawings/Diagrams in
10. After you complete the testing, connect the wire harness connector to the
engine speed switch.
11. Secure the control panel to the machine with the removed fasteners; refer
to Assembling the Control Console (page
Normal Circuits
2+1
None
2+3
Appendix A (page A–1)—Foldout Drawings.
6–54).
Page 5–68
Other Circuits
5+4
None
5+6
Groundsmaster 360
16225SL Rev C