Toro Groundsmaster 360 Service Manual page 267

Using the InfoCenter Display for Troubleshooting (continued)
Groundsmaster 360
16225SL Rev C
•
PTO The components necessary to engage the cutting deck.
•
Engine The components necessary to start and run the engine.
•
Machine Inputs The components necessary to indicate the state of other
machine inputs such as accessories and air conditioning clutch.
If a machine operation is malfunctioning, the following procedure can help
identify the cause of the component or circuit wiring causing the malfunction.
1. Park the machine on a level surface, set the parking brake, and shut off
the engine.
2. Set the key switch to the O
Diagnostic Screen.
3. Select (highlight) the malfunctioning machine operation and press the
left/right button (as indicated by the
example, the Decks operation has been selected
4. Select (highlight) the Inputs and press the left/right button (as indicated by
the at the bottom of the screen).
g187142
1. Input items
2. Left/right button
position and navigate to the InfoCenter
N
at the bottom of the screen). For this
Figure 184
3. Down button
4. Menu/back button
Page 5–31
(Figure 183).
Electrical System: Troubleshooting