Toro Groundsmaster 360 Service Manual page 368

Disassembling the Brake
Chassis: Service and Repairs
g036984
1. Hold down cup (2 each)
2. Hold down spring (2 each)
3. Shoe spring
4. Shoe spring (actuator)
5. Brake shoe (2 each)
6. Retaining ring
7. Clevis pin
g036985
1. Brake shoe
2. Hold down components
3. Shoe spring
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, and remove the key from the key switch.
2. Block the wheels with chocks to prevent the machine from moving.
Figure 263
8. Brake actuator
9. Brake actuator lever
10. Rivet (4 each)
11. Back-up plate
12. Boot
13. Backing plate
14. Hold down pin (2 each)
Figure 264
4. Shoe spring (actuator)
5. Brake actuator
Page 6–16 Groundsmaster 360
16225SL Rev C