Cutting Deck Pull Links - Toro Groundsmaster 360 Service Manual

Cutting Deck Pull Links

g033725
1. Bolt (2 each)
2. Pull link assembly (2 each)
3. Locknut (4 each)
4. Flange bushing (4 each)
5. Plain spacer (2 each)
6. Bumper (2 each)
Disassembling the Cutting Deck Pull Links
Groundsmaster 360
16225SL Rev C
7. Flange nut (2 each)
8. T-bar (4 each)
9. Clevis yoke (4 each)
10. Cotter pin (4 each)
11. Clevis pin (4 each)
12. Flange nut (8 each)
1. Remove the cutting deck from the machine; refer to the Cutting Deck
Operator's Manual.
The pull link torsion springs can cause some rotation of the pull
links during the removal process, causing personal injury.
Be careful when removing the pull links from the cutting deck.
Figure 317
13.
14.
15.
16.
17.
18.
CAUTION
Page 7–19
Bolt
Bolt
Retainer pin (2 each)
45° lube fitting (2 each)
Torsion spring (2 each)
Bushing (2 each)
Cutting Deck: Service and Repairs