Toro Groundsmaster 360 Service Manual page 289

Identification and Function (continued)
Testing the Fuses
Groundsmaster 360
16225SL Rev C
Right fuse 2 (7.5 A): Protects power supply for TEC outputs 1 through 4 (fuel
pump and engine ECU). The TEC outputs 3 and 4 are not used on the machine.
Right fuse 3 (7.5 A): Protects power supply for TEC outputs 5 through 8 (PTO
solenoid coil, steering selector switch, indicator light, deck lift manifold S1 and
S2 coils).
Right fuse 4 (7.5 A): Protects power supply for TEC outputs 9 through 12 (steer
mode selector valve coil). The TEC outputs 10, 11, and 12 are not used on
the machine.
Ensure that the key switch is in the O
switch. Remove the fuses from the fuse block for testing. The fuse should have
continuity between the fuse terminals.
position and the key is removed from the
FF
Page 5–53 Electrical System: Testing the Electrical Components