Heater And Air Conditioning Evaporator Cores - Toro Groundsmaster 360 Service Manual

Heater and Air Conditioning Evaporator Cores

g036621
1. Mixing box
2. Rivet (19 each)
3. Mixing box cover
4. Cover insulation
5. Screw (5 each)
6. Mount bracket cover
Removing the Heater and Air Conditioning Evaporator Cores
Operator Cab: Service and Repairs
7. Cover gasket
8. Screw (2 each)
9. Freeze switch
10. Mount bracket (shown with fan)
11. Expansion valve
12. O-ring (2 each)
Note: The heater and evaporator cores can be removed and installed with the
mixing box (item 1 in Figure
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
2. Remove the roof panel from the top of the cab to get access to the heater
and air conditioning evaporator cores; refer to
(page 8–10).
3. Read the General Precautions for Removing and Installing the Air
Conditioning System Components (page
Figure 331
13.
14.
15.
16.
17.
18.
331) attached to the cab headliner.
8–4).
Page 8–24
Air conditioning evaporator core
Heater core
Double sided tape (2 each)
Gasket (4 each)
Condensation catch foam
Air diverter assembly
Removing the Roof Assembly
Groundsmaster 360
16225SL Rev C