Toro Groundsmaster 360 Service Manual page 182

Assembling the Transmission (continued)
Hydraulic System: Service and Repairs
g033430
1. Right pump shaft
2. Outer pump rotor
41. Install the key into the key slot in the right pump shaft. Lubricate the inner
and outer charge pump rotors with clean hydraulic fluid. Slide the inner pump
rotor onto the pump shaft and align the pump rotor with the key. Place the
outer pump rotor onto the inner pump rotor.
g033429
1. Pin
42. Install the 2 pins into the bores of the pump body.
43. Apply clean grease to the pump body O-rings to hold them in position during
assembly. Place the O-rings in the pump body locations.
Figure 124
3. Inner pump rotor
Figure 125
2. Pump body
Page 4–124 Groundsmaster 360
16225SL Rev C