Toro Groundsmaster 360 Service Manual page 418

1. Back extension
2. Back cushion
3. Back panel
4. Screw
5. Handle
6. Knob
7. Flange nut
8. Spring
9. Bushing
10. Screw
11. Bracket
12. Nut
13. Rivet
14. Right cover
15. Left cover
16. Nut
17. Seat belt latch
Disassembling the Operator Seat
Assembling the Operator Seat
Chassis: Service and Repairs
Figure 301 (continued)
18. Bolt
19. Seat belt
20. Seat wire harness
21. Seat cushion
22. Adjuster rod
23. Spring
24. Spring seat
25. Right armrest
26. Nut
27. Washer
28. Rivet
29. Handle assembly
30. Lever
31. Pin
32. Spring
33. Torx screw
34. Air spring assembly
Note: Refer to your Parts Catalog for the operator seat components that are
available.
1. If necessary, remove the operator seat from the machine; refer to
the Operator Seat (page
2. Disassemble the operator seat as shown in
1. Assemble the operator seat as shown in
2. If the operator seat was removed from the machine, secure the seat to the
machine; refer to Installing the Operator Seat (page
35. Rivet
36. Compressor assembly
37. Retaining ring
38. Shock absorber
39. Suspension pivot bushing 56.
40. Socket-head screw
41. Band
42. Suspension pivot
43. Bushing
44. Bracket
45. Bolt
46. Bracket
47. Nut
48. Suspension assembly
49. Screw
50. Right seat adjuster
51. Left seat adjuster
6–60).
Figure
Page 6–66
52. Flange nut (6 each)
53. Screw (6 each)
54. Bracket
55. Bellows
Backrest handle
57. Backrest lever
58. Left armrest
59. Screw
60. Seat base assembly
61. Handle
62. Rivet
63. Extension bracket
64. Washer
65. Clip
Removing
Figure 301.
301.
6–61).
Groundsmaster 360
16225SL Rev C