Mitsubishi Electric MELFA FR CR800 Series User Manual page 106

9.2.5.3. When NET/10(H), CC IE is selected
It is possible to communicate using the "CC-Link IE controller network port" or "CC-Link IE field network port" newly
established in the QnCPU.
When "NET/10, CC IE" is selected as the computer interface, the communications routes that you can select are as
follows.
Table 9-7 Communication Routes That Can Be Selected for "NET/10(H), CC IE"
No.
1 NET/10(H), CC IE board communication
2 NET/10(H), CC IE board communication
CC-Link other station access
3 NET/10(H), CC IE board communication
Serial communication other station access
NET/10(H), CC IE through NET/10(H), CC IE Unit – CC-Link Other Station Access) Detailed Settings
"(5) Network communication route setting of MNET/10" and "(6) Coexistence network route setting of C24" may not
be settable depending on the network route selected.
9-106
Figure 9-9 NET/10(H), CC IE (NET/10(H), CC IE Board Communication
Communications Route
Other station access via NET/10(H), CC IE unit
NET/10(H), CC IE via NET/10(H), CC IE unit –
NET/10(H), CC IE via NET/10(H), CC IE unit -
9-106