Mitsubishi Electric MELFA FR CR800 Series User Manual page 305

14.3.2.2. Deleting a named signal
Select the signals to delete from the list. You can select multiple signals by clicking them while holding down the
[Ctrl] key or the [Shift] key on the keyboard.
However, dedicated input/output signals cannot be deleted.
Also, you cannot delete input signals and output signals at the same time. Finally, delete the select signals in
the list with a mouse click.
14.3.2.3. Pseudo-input / forced output of named signal
Pseudo input / forced output is executed for the I/O signal selected in the list.
If you select an input signal in the list and click the [Input/Output] button, the pseudo input setting screen will be
opend.Set the value of Bit or Port to execute the pseudo input.
If you select an output signal in the list and click the [Input/Output] button, the forced output setting screen will be
opend.Set the value of Bit or Port to execute the forced output.
14-305 14-305