9.2.5.5. When Ethernet is selected
When "Ethernet" is selected as the computer interface, the communications routes that you can select are as
follows.
Table 9-9 Communication Routes That Can Be Selected for "Ethernet"
No.
1
Ethernet board communication Access other station via Ethernet module
2
Ethernet board communication Access Ethernet-serial communication other
station via Ethernet module
3
Ethernet board communication Access Ethernet-CC-Link other station via
Ethernet module
4
Ethernet port direct communication PLC module connection
5
Ethernet port direct communication Access serial communication other station
via PLC module
6
Ethernet port direct communication Access CC-Link other station via PLC
module
7
Ethernet port IP address designate communication PLC module connection
8
Ethernet
port
communication other station via PLC module
9
Ethernet port IP address designate communication Access CC-Link other
station via PLC module
Figure 9-11 Ethernet (Ethernet board communication Access Ethernet-serial communication other station via Ethernet
"(1)PC side I/F Ethernet board setting", "(2)Network communication route setting Ethernet", "(5)Network
communication route setting of MNET/10", and "(6)Coexistence network route setting of C24" may not be settable
depending on the network route selected.
9-108
Communications Route
IP
address
designate
module) Detailed Settings
communication
Access
Special mention
serial
9-108